|
|
Damage tolerance optimization of composite stringer run-out under tensile load |
Badalló i Cañellas, Pere
; Trias Mansilla, Daniel
; Lindgaard, Esben
|
|
|
Damage tolerance optimization of composite stringer run-out under tensile load |
Badalló i Cañellas, Pere
; Trias Mansilla, Daniel
; Lindgaard, Esben
|
|
|
Damage tolerance optimization of composite stringer run-out under tensile load |
Badalló i Cañellas, Pere
; Trias Mansilla, Daniel
; Lindgaard, Esben
|
|
1 juny 2018 |
Damage tolerance optimization of composite stringer run-out under tensile load |
|
|
5 juny 2018 |
Damage tolerance optimization of composite stringer run-out under tensile load |
Badalló i Cañellas, Pere
; Trias Mansilla, Daniel
; Lindgaard, Esben
|
|
15 febrer 2020 |
Damage tolerance optimization of composite stringer run-out under tensile load |
Badalló i Cañellas, Pere
; Trias Mansilla, Daniel
; Lindgaard, Esben
|
|
1 desembre 2015 |
Damage tolerance optimization of composite stringer run-out under tensile load |
Badalló i Cañellas, Pere
; Trias Mansilla, Daniel
; Lindgaard, Esben
|
|
|
A data reduction method based on the J-integral to obtain the interlaminar fracture toughness in a mode II end-loaded split (ELS) test |
Pérez Galmés, Magdalena
; Renart Canalias, Jordi
; Sarrado Molina, Carlos
; RodrÃguez Bellido, Ana Teresa
; Costa i Balanzat, Josep
|
|
1 novembre 2016 |
A data reduction method based on the J-integral to obtain the interlaminar fracture toughness in a mode II end-loaded split (ELS) test |
Pérez Galmés, Magdalena
; Renart Canalias, Jordi
; Sarrado Molina, Carlos
; RodrÃguez Bellido, Ana Teresa
; Costa i Balanzat, Josep
|
|
31 maig 2023 |
Detecting and characterising interfacial fracture through the face sheets of sandwich structures using mirror-assisted imaging techniques |
Leung, Hiu Ling
|
|
setembre 2022 |
Determinació de la resistència a fractura pel mode II per materials reforçats unidirecionament utilitzant una prova de cà rrega final calibrada (C-ELS) i una longitud efectiva de fissura aproximada |
Yáñez Alabart, DarÃo
|
|
31 maig 2023 |
Determination and modelization of mode I interlaminar fracture thoughness on 2D woven oxide/oxide composite using double cantilever beam test |
Drouin, Thomas
|
|
31 maig 2023 |
Determining fracture properties for predicting damage propagation from notches in composite structures |
Wisnom, Michael
|
|
31 maig 2023 |
Determining fracture properties for predicting damage propagation from notches in composite structures |
Wisnom, Michael R.
; Sun, Xiaoyang
; Xu, Xiaodong
|
|
31 maig 2023 |
Development of tensile specimens with bonded continuous protective layers for the accurate tensile failure strain determination of unidirectional carbon/epoxy composites |
Czél, Gergely
|
|
31 maig 2023 |
Dual-scale model for delamination of composites with different fiber orientations at interface |
Mehdikhani, Mahoor
|
|
31 maig 2023 |
Dual-scale model for delamination of composites with different fiber orientations at interface |
Mehdikhani, Mahoor
; Gol, Anna de
; Matveeva, Anna
; Carrella, Delphine
; Gorbatikh, Larissa
|
|
31 maig 2023 |
Effects of variable amplitude fatigue on delamination and crack growth rate models |
Mosbjerg Jensen, Simon
|
|
|
An Engineering Solution for using Coarse Meshes in the Simulation of Delamination with Cohesive Zone Models |
Turon Travesa, Albert
; Dávila, Carlos G.
; Camanho, Pedro Manuel Ponces Rodrigues de Castro
; Costa i Balanzat, Josep
|
|
2005 |
An Engineering Solution for using Coarse Meshes in the Simulation of Delamination with Cohesive Zone Models |
Turon Travesa, Albert
; Dávila, Carlos G.
; Camanho, Pedro Manuel Ponces Rodrigues de Castro
; Costa i Balanzat, Josep
|
|
1 juny 2018 |
An Engineering Solution for using Coarse Meshes in the Simulation of Delamination with Cohesive Zone Models |
|
|
5 juny 2018 |
An Engineering Solution for using Coarse Meshes in the Simulation of Delamination with Cohesive Zone Models |
Turon Travesa, Albert
; Dávila, Carlos G.
; Camanho, Pedro Manuel Ponces Rodrigues de Castro
; Costa i Balanzat, Josep
|
|
11 maig 2021 |
Estudio de la influencia de los factores ambientales en el comportamiento de la unión adhesiva entre hormigón y barras FRP NSM |
Duran Sureda, Imma
|
|
|
Estudi de les propietats elà stiques i de fractura de teixits plans de fibra |
Vilà Grau, Carles
|
|
setembre 2008 |
Estudi de les propietats elà stiques i de fractura de teixits plans de fibra |
Vilà Grau, Carles
|