Ítem


Mechanically induced thermal changes in amorphous metallic melt-spun alloys

Melt-spun metallic Fe-Ni ribbon glasses were subjected to high-energy ball milling under different milling conditions. Thermal changes of the glassy sample during milling were characterized by means of differential scanning calorimetry (DSC) and thermogravimetry (TG). On increasing the ball to powder ball ratio or the milling intensity, the milling time necessary to obtain alloys in powdered form decreases. Furthermore, the thermal stability of the crystalline phase also decreases. A commitment between the desired powder morphology and the maintenance of the amorphous state is necessary to choose the best milling conditions. Significant oxidation was detected above the crystallization onset temperature. Furthermore, the material remains basically amorphous with an incipient crystalline phase in the more energetic conditions. © 2003 Elsevier Science B.V. All rights reserved.

Financial support from MICYT (project no. MAT2000-0388) and DURSI (SGR2001-00190)

Elsevier

Director: Comisión Interministerial de Ciencia y Tecnología (Espanya)
Autor: Suñol Martínez, Joan Josep
González Gasch, Àlex
Clavaguera-Mora, M-T.
Clavaguera, N.
Data: 1 setembre 2003
Resum: Melt-spun metallic Fe-Ni ribbon glasses were subjected to high-energy ball milling under different milling conditions. Thermal changes of the glassy sample during milling were characterized by means of differential scanning calorimetry (DSC) and thermogravimetry (TG). On increasing the ball to powder ball ratio or the milling intensity, the milling time necessary to obtain alloys in powdered form decreases. Furthermore, the thermal stability of the crystalline phase also decreases. A commitment between the desired powder morphology and the maintenance of the amorphous state is necessary to choose the best milling conditions. Significant oxidation was detected above the crystallization onset temperature. Furthermore, the material remains basically amorphous with an incipient crystalline phase in the more energetic conditions. © 2003 Elsevier Science B.V. All rights reserved.
Financial support from MICYT (project no. MAT2000-0388) and DURSI (SGR2001-00190)
Format: application/pdf
Accés al document: http://hdl.handle.net/10256/12741
Llenguatge: eng
Editor: Elsevier
Col·lecció: info:eu-repo/semantics/altIdentifier/doi/10.1016/S0167-577X(03)00294-5
info:eu-repo/semantics/altIdentifier/issn/0167-577X
CICYT/PN 2000-2003/MAT2000-0388-C02-02
Drets: Tots els drets reservats
Matèria: Corrosió i anticorrosius
Corrosion and anti-corrosives
Oxidació
Oxidation
Aliatges -- Propietats tèrmiques
Alloys -- Thermal properties
Títol: Mechanically induced thermal changes in amorphous metallic melt-spun alloys
Tipus: info:eu-repo/semantics/article
Repositori: DUGiDocs

Matèries

Autors