Item


From pine sawdust to cellulose nanofibres

Biorefinery technology is a current alternative to petroleum based industry to produce energy, chemicals and materials. The use of forest and agricultural lignocellulosic residues as raw materials to generate value-added products has become a topic of great interestdue to their renewability and availability. Pine sawdust is a promising candidate as raw material for biorefinery. This waste, which comes from the primary industrialization of wood, is available in large quantities, at low cost, and is currently open-airburned. The aim of this study was to obtain cellulose nanofiber (CNF) from pine sawdust. Delignification methods were applied to pulp until a kappa number lower than 1was achieved. CNF was produced by the combination of chemical (TEMPO-oxidation) pretreatment and mechanical destructuration in a homogenizer. Once CNF was produced at different oxidation degrees, the degree of polymerization, cationic demand, carboxyl rate, and the yield of fibrillation were determined with the purpose of assessing the effect of the oxidation degree on the final properties thereof.Finally, the suitability of using the obtained CNF as paper strength additive was studied through the assessment of the mechanical properties increase of paper

Editura Academiei Romane

Author: Ehman, Nanci Vanesa
Tarrés Farrés, Joaquim Agustí
Delgado Aguilar, Marc
Vallejos, María Evangelina
Felissia, Fernando
Area, Maria Cristina
Mutjé Pujol, Pere
Date: 2016
Abstract: Biorefinery technology is a current alternative to petroleum based industry to produce energy, chemicals and materials. The use of forest and agricultural lignocellulosic residues as raw materials to generate value-added products has become a topic of great interestdue to their renewability and availability. Pine sawdust is a promising candidate as raw material for biorefinery. This waste, which comes from the primary industrialization of wood, is available in large quantities, at low cost, and is currently open-airburned. The aim of this study was to obtain cellulose nanofiber (CNF) from pine sawdust. Delignification methods were applied to pulp until a kappa number lower than 1was achieved. CNF was produced by the combination of chemical (TEMPO-oxidation) pretreatment and mechanical destructuration in a homogenizer. Once CNF was produced at different oxidation degrees, the degree of polymerization, cationic demand, carboxyl rate, and the yield of fibrillation were determined with the purpose of assessing the effect of the oxidation degree on the final properties thereof.Finally, the suitability of using the obtained CNF as paper strength additive was studied through the assessment of the mechanical properties increase of paper
Format: application/pdf
Document access: http://hdl.handle.net/10256/13942
Language: eng
Publisher: Editura Academiei Romane
Collection: info:eu-repo/semantics/altIdentifier/issn/0576-9787
Rights: Tots els drets reservats. Reproduced by permission of Romanian Academy, the owner of the publishing rights
Subject: Fibres de cel·lulosa
Cellulose fibers
Nanofibres
Nanofibers
Paper -- Fabricació
Papermaking
Title: From pine sawdust to cellulose nanofibres
Type: info:eu-repo/semantics/article
Repository: DUGiDocs

Subjects

Authors