Ítem


Disseny i fabricació d’un mandril “torpede” per prova pilot en un procés d’extrusió de PVC mitjançant tecnologies additives

La fabricació de perfils de PVC tancats esdevé un problema, ja que requereix un temps de fabricació elevat, ja que al ser un perfil tancat impedeix que la temperatura interna del perfil es dissipi degut a la convecció de l’ambient. Per tant, la velocitat de producció és baixa per evitar les deformacions produïdes pel PVC calent, ja que a la sortida el material no té suficient consistència com per mantenir-se per si mateix

The manufacture of closed PVC profiles is a problem because it requires a high manufacturing time, since being a closed profile prevents the internal temperature of the profile from dissipating due to the convection of the environment. Therefore, the production speed is low to avoid the deformations produced by the hot PVC, since at the output the material does not have enough consistency to maintain itself

Director: Bayer Resplandis, Jordi
Altres contribucions: Universitat de Girona. Escola Politècnica Superior
Autor: Cruz Beyret, Raül
Data: 1 setembre 2018
Resum: La fabricació de perfils de PVC tancats esdevé un problema, ja que requereix un temps de fabricació elevat, ja que al ser un perfil tancat impedeix que la temperatura interna del perfil es dissipi degut a la convecció de l’ambient. Per tant, la velocitat de producció és baixa per evitar les deformacions produïdes pel PVC calent, ja que a la sortida el material no té suficient consistència com per mantenir-se per si mateix
The manufacture of closed PVC profiles is a problem because it requires a high manufacturing time, since being a closed profile prevents the internal temperature of the profile from dissipating due to the convection of the environment. Therefore, the production speed is low to avoid the deformations produced by the hot PVC, since at the output the material does not have enough consistency to maintain itself
Format: application/pdf
application/zip
Accés al document: http://hdl.handle.net/10256/17847
Llenguatge: cat
Col·lecció: Enginyeria Mecànica (TFG)
Drets: Attribution-NonCommercial-NoDerivatives 4.0 International
URI Drets: http://creativecommons.org/licenses/by-nc-nd/4.0/
Matèria: Clorur de polivinil
Polyvinyl chloride
Plàstics -- Extrusió
Plastics -- Extrusion
Títol: Disseny i fabricació d’un mandril “torpede” per prova pilot en un procés d’extrusió de PVC mitjançant tecnologies additives
Tipus: info:eu-repo/semantics/bachelorThesis
Repositori: DUGiDocs

Matèries

Autors