Ítem


Estudis d’adsorció i desorció de metalls en (micro)plàstics

(Micro)plastics are solid particles formed by polymers, insoluble in water and with a particle size of less than 5 mm. Its presence in different aquatic environments has caused a potential pollution impact on the environment and human health. Some of them also contain metals due to their own manufacture or obtained from adsorption processes through the medium. So, this combination of metals and (micro)plastics causes an increase in their toxicity and danger to the ecosystem. The main objective of this work is to study, through controlled laboratory experiments, the adsorption and desorption of metals in different types of samples of commercial (micro)plastics (polyethylene 53-63μm, 3mm) and environmental ((micro)plastics collected in Mediterranean Sea and Atlantic Ocean) as well as fragments of fishing nets and samples collected in the agropiles of the Mediterranean cormorant (Phalacrocorax aristotelis desmarestii). It should be noted that different analytical techniques (ICP-MS, ICP-OES and TXRF) were used during the work to determine the concentration of the metals present in the extracts obtained in the adsorption and desorption studies. The μ-XRF technique has also been used to determine the presence of metals in the solid samples of (micro)plastics. The results obtained in the adsorption experiments have shown that the adsorption capacity depends on the type of metal, chemistry of the aqueous solution and particle size of the (micro)plastic. In the latter case, it should be noted that the adsorption of metals is higher for samples of (micro)plastics of smaller size. In order to study the metal content that can be released from the (micro)plastic samples and evaluate their possible danger in the exposed environment, different leaching tests have been applied. It was found that some of the samples studied (fishing nets) had a considerable leaching of metals with values of up to 1000 μg/kg (Pb) and that the metals present could migrate in simulated gastric conditions of seabirds. Several metals (Pb, Cu, Fe, Cd, Zn, Cr and Ti) were also identified in the (micro)plastic samples collected in the Mediterranean Sea and the Atlantic Ocean. However, these metals were not easily desorbed from the samples. This fact can be related to the aging of this type of samples in sea water

6

14

Director: Marguí Grabulosa, Eva
Altres contribucions: Universitat de Girona. Facultat de Ciències
Autor: Vilarrúbies i Palomeras, Berta
Data: juliol 2023
Resum: (Micro)plastics are solid particles formed by polymers, insoluble in water and with a particle size of less than 5 mm. Its presence in different aquatic environments has caused a potential pollution impact on the environment and human health. Some of them also contain metals due to their own manufacture or obtained from adsorption processes through the medium. So, this combination of metals and (micro)plastics causes an increase in their toxicity and danger to the ecosystem. The main objective of this work is to study, through controlled laboratory experiments, the adsorption and desorption of metals in different types of samples of commercial (micro)plastics (polyethylene 53-63μm, 3mm) and environmental ((micro)plastics collected in Mediterranean Sea and Atlantic Ocean) as well as fragments of fishing nets and samples collected in the agropiles of the Mediterranean cormorant (Phalacrocorax aristotelis desmarestii). It should be noted that different analytical techniques (ICP-MS, ICP-OES and TXRF) were used during the work to determine the concentration of the metals present in the extracts obtained in the adsorption and desorption studies. The μ-XRF technique has also been used to determine the presence of metals in the solid samples of (micro)plastics. The results obtained in the adsorption experiments have shown that the adsorption capacity depends on the type of metal, chemistry of the aqueous solution and particle size of the (micro)plastic. In the latter case, it should be noted that the adsorption of metals is higher for samples of (micro)plastics of smaller size. In order to study the metal content that can be released from the (micro)plastic samples and evaluate their possible danger in the exposed environment, different leaching tests have been applied. It was found that some of the samples studied (fishing nets) had a considerable leaching of metals with values of up to 1000 μg/kg (Pb) and that the metals present could migrate in simulated gastric conditions of seabirds. Several metals (Pb, Cu, Fe, Cd, Zn, Cr and Ti) were also identified in the (micro)plastic samples collected in the Mediterranean Sea and the Atlantic Ocean. However, these metals were not easily desorbed from the samples. This fact can be related to the aging of this type of samples in sea water
6
14
Format: application/pdf
Accés al document: http://hdl.handle.net/10256/24353
Llenguatge: cat
Drets: Attribution-NonCommercial-NoDerivatives 4.0 International
URI Drets: http://creativecommons.org/licenses/by-nc-nd/4.0/
Matèria: Microplàstics -- Aspectes ambientals
Metalls -- Aspectes ambientals
Metalls -- Absorció i adsorció
Aigua -- Contaminació
Mar -- Contaminació per metalls
Microplastics -- Environmental aspects
Metals -- Absorption
Metals -- Environmental aspects
Marine pollution
Títol: Estudis d’adsorció i desorció de metalls en (micro)plàstics
Tipus: info:eu-repo/semantics/bachelorThesis
Repositori: DUGiDocs

Matèries

Autors