Ítem


Building 3D City models: Testing and Comparing Laser scanning and low-cost UAV data using FOSS technologies

Presentació sobre eines de programari lliure per a la gestió automàtica dels volums dels edificis

Presently, the use of new technologies for the acquisition of 3D geographical data on time is very important for urban planning. Applications include evaluation and monitoring of urban parameters (ie. volumetric data),indicators of an urban plan, or monitoring built-up areas and illegal buildings. This type of 3D data can be acquired through an Airborne Laser Scanning system, also known as LiDAR (Light Detection And Ranging) or by Unnamed Aerial Vehicles (UAV). The aim of this paper is to use and compare these two technologies for extracting building parameters (façade height and volume). Existing literature evaluates each technology separately. This work pioneers benchmarking between LiDAR and UAV point-clouds. The basic function of LiDAR is collecting a georeferenced and dense 3D point cloud from a laser scanner during flight. Therefore it is possible to obtain a similar 3D point cloud using processing algorithms for stereo aerial images, obtained by large or small-format digital cameras (the small-format camera implemented in Unmanned Aerial Vehicles). The choosen study area is located in Praia de Faro, an open sandy beach in Algarve (Southern Portugal), limited west by the Ria Formosa barrier island system. The area defined has an extension of 300×100m. The methodology is divided in two distinct stages: (1) parameters extraction, (2) comparative technology analysis. Lidar point- cloud resolution is approximately 6 pts/m2 and UAV point-cloud 60 pts/m2. FOSS technologies have proven to be the most adequate adequate platform for the development and diffusion of advanced analytical tools in the Geographical Information Sciences (GISci). Data management in this paper is supported by a Geographical Database Management System (GDBMS), implemented using PostgreSQL and PostGIS. Statistical analysis is performed using R whilst advanced spatial functions are used in GRASS

http://hdl.handle.net/10256.1/3360

Universitat de Girona. Servei de Sistemes d’Informació Geogràfica i Teledetecció

Autor: Rebelo, Carla Roque
Manuel Rodrigues, A.
Tenedório, J. António
Gonçalves, J. Alberto
Marnoto, J.
Data: 27 març 2014
Resum: Presentació sobre eines de programari lliure per a la gestió automàtica dels volums dels edificis
Presently, the use of new technologies for the acquisition of 3D geographical data on time is very important for urban planning. Applications include evaluation and monitoring of urban parameters (ie. volumetric data),indicators of an urban plan, or monitoring built-up areas and illegal buildings. This type of 3D data can be acquired through an Airborne Laser Scanning system, also known as LiDAR (Light Detection And Ranging) or by Unnamed Aerial Vehicles (UAV). The aim of this paper is to use and compare these two technologies for extracting building parameters (façade height and volume). Existing literature evaluates each technology separately. This work pioneers benchmarking between LiDAR and UAV point-clouds. The basic function of LiDAR is collecting a georeferenced and dense 3D point cloud from a laser scanner during flight. Therefore it is possible to obtain a similar 3D point cloud using processing algorithms for stereo aerial images, obtained by large or small-format digital cameras (the small-format camera implemented in Unmanned Aerial Vehicles). The choosen study area is located in Praia de Faro, an open sandy beach in Algarve (Southern Portugal), limited west by the Ria Formosa barrier island system. The area defined has an extension of 300×100m. The methodology is divided in two distinct stages: (1) parameters extraction, (2) comparative technology analysis. Lidar point- cloud resolution is approximately 6 pts/m2 and UAV point-cloud 60 pts/m2. FOSS technologies have proven to be the most adequate adequate platform for the development and diffusion of advanced analytical tools in the Geographical Information Sciences (GISci). Data management in this paper is supported by a Geographical Database Management System (GDBMS), implemented using PostgreSQL and PostGIS. Statistical analysis is performed using R whilst advanced spatial functions are used in GRASS
Format: application/pdf
Accés al document: http://hdl.handle.net/10256/9036
Llenguatge: eng
Editor: Universitat de Girona. Servei de Sistemes d’Informació Geogràfica i Teledetecció
Col·lecció: VIII Jornadas de SIG Libre
Vegeu també: http://hdl.handle.net/10256.1/3360
Drets: Tots els drets reservats
Matèria: Programari lliure -- Congressos
Open source software -- Congresses
Urbanisme -- Congressos
City planning -- Congresses
Títol: Building 3D City models: Testing and Comparing Laser scanning and low-cost UAV data using FOSS technologies
Tipus: info:eu-repo/semantics/article
Repositori: DUGiDocs

Matèries

Autors