Ítem


Micromechanics of Mechanical, Thermomechanical, and Chemi-Thermomechanical Pulp from Orange Tree Pruning as Polypropylene Reinforcement: A Comparative Study

This work explores the use of mechanical (MP), thermomechanical (TMP), and chemi-thermomechanical (CTMP) pulps from orange tree pruning fibers (OPF) as reinforcing elements of polypropylene (PP) composites. Due to the nature of the natural fibers, the use of a coupling agent is needed to attain a good interface and to prevent fiber slippage from the matrix. The main objective of the present work was to investigate the orientation factor, the interfacial shear strength, and the intrinsic strength of the OPF. Coupled and non-coupled composites were formulated and tested, optimizing the coupling agent content with the objective of maximizing the tensile strength of the composites. Hirsch and Kelly-Tyson models and the Bowyer-Bader methodology were used to compute the micromechanic properties. The contribution of subcritical, supercritical fibers, and matrix were also calculated

The authors are grateful for the support of the EMCI - Ministerio de Ciencia e Innovacion (MICINN) for funding the research by the specific Research Program CTQ2010-21660-C03-03

North Carolina State University

Autor: Reixach Corominas, Rafel
Franco Marquès, Elena
El Mansouri, Nour-Eddine
Ramírez de Cartagena Bisbe, Francisco
Arbat Pujolràs, Gerard
Espinach Orús, Xavier
Mutjé Pujol, Pere
Resum: This work explores the use of mechanical (MP), thermomechanical (TMP), and chemi-thermomechanical (CTMP) pulps from orange tree pruning fibers (OPF) as reinforcing elements of polypropylene (PP) composites. Due to the nature of the natural fibers, the use of a coupling agent is needed to attain a good interface and to prevent fiber slippage from the matrix. The main objective of the present work was to investigate the orientation factor, the interfacial shear strength, and the intrinsic strength of the OPF. Coupled and non-coupled composites were formulated and tested, optimizing the coupling agent content with the objective of maximizing the tensile strength of the composites. Hirsch and Kelly-Tyson models and the Bowyer-Bader methodology were used to compute the micromechanic properties. The contribution of subcritical, supercritical fibers, and matrix were also calculated
The authors are grateful for the support of the EMCI - Ministerio de Ciencia e Innovacion (MICINN) for funding the research by the specific Research Program CTQ2010-21660-C03-03
Accés al document: http://hdl.handle.net/2072/219560
Llenguatge: eng
Editor: North Carolina State University
Drets: Tots els drets reservats
Matèria: Polpa de fusta
Wood-pulp
Materials compostos
Composite materials
Títol: Micromechanics of Mechanical, Thermomechanical, and Chemi-Thermomechanical Pulp from Orange Tree Pruning as Polypropylene Reinforcement: A Comparative Study
Tipus: info:eu-repo/semantics/article
Repositori: Recercat

Matèries

Autors