Item


Net-tension strength of double lap joints taking into account the material cohesive law

Bolted/pinned joints are common elements in many engineering structures and their failure can lead to catastrophic failure of these structures. Therefore, their strength prediction is essential for an accurate design of the joints and, consequently, for the reliable design of the structure. The main objective of this paper is to introduce an analytical model to predict the net-tension strength of mechanically fastened joints in isotropic quasi-brittle structures. The model is formulated based on the cohesive zone model. The effect of the material cohesive law, the contact stress distribution due to presence of the bolt, the specimen size and the hole radius to specimen width ratio on the strength of the joint are considered in the present model. The obtained predictions are compared with the available experimental results with good agreement. The present model is capable of introducing simple design charts for the bolted joints in structures made of isotropic quasi-brittle materials

The first author would like to thank Generalitat de Catalunya for the FI pre-doctorate Grant 2012FI. The authors acknowledge the financial support of the Ministerio de Ciencia e Innovación under the project MAT2009-07918

Elsevier

Manager: Fundacion para la Innovación, Desarrollo y Aplicación de los Materiales Compuestos (FIDAMC)
Author: Kabeel, Abdallah Mahmoud Bayoumi
Maimí Vert, Pere
Gascons i Clarió, Narcís
González Juan, Emilio Vicente
Abstract: Bolted/pinned joints are common elements in many engineering structures and their failure can lead to catastrophic failure of these structures. Therefore, their strength prediction is essential for an accurate design of the joints and, consequently, for the reliable design of the structure. The main objective of this paper is to introduce an analytical model to predict the net-tension strength of mechanically fastened joints in isotropic quasi-brittle structures. The model is formulated based on the cohesive zone model. The effect of the material cohesive law, the contact stress distribution due to presence of the bolt, the specimen size and the hole radius to specimen width ratio on the strength of the joint are considered in the present model. The obtained predictions are compared with the available experimental results with good agreement. The present model is capable of introducing simple design charts for the bolted joints in structures made of isotropic quasi-brittle materials
The first author would like to thank Generalitat de Catalunya for the FI pre-doctorate Grant 2012FI. The authors acknowledge the financial support of the Ministerio de Ciencia e Innovación under the project MAT2009-07918
Document access: http://hdl.handle.net/2072/296909
Language: eng
Publisher: Elsevier
Rights: Tots els drets reservats
Subject: Resistència de materials
Strength of materials
Esforç i tensió
Strains and stresses
Title: Net-tension strength of double lap joints taking into account the material cohesive law
Type: info:eu-repo/semantics/article
Repository: Recercat

Subjects

Authors