Warning: error_log(/dades/dugi/log//querys.log) [function.error-log]: failed to open stream: Read-only file system in /dades/dugi/lib/log/log.php on line 32
DUGi: Ítem | Recercat - Curie temperature in Fe(Ni)Nb based mechanically alloyed materials

Ítem


Curie temperature in Fe(Ni)Nb based mechanically alloyed materials

A conventional thermogravimeter has been adapted with a small magnet to detect the Curie temperature, T C. The measurements were performed in several Fe(Ni)NbB alloys developed in a nanocrystalline form by mechanical alloying. The B addition favors a slight diminution (10-20°C), and the Ni addition the existence of three transitions related with bccFe, fcc(Fe-Ni) abd fccNi-rich environments. Furthermore, complementary analysis were performed by means of differential thermal analysis, scanning electron microscopy with energy dispersive X-ray microanalysis and by induced coupled plasma. Small contamination was found. A mass increase (about 1 mass%) was detected by thermogravimetry related to oxidation. Analysis allows us to state the inhomogeneity of the alloys obtained after 80 h of milling

Financial support from MICYT (project No. MAT2003-08271) and DURSI (project 2001SGR-00190) is acknowledged

Springer Verlag

Director: Ministerio de Ciencia y Tecnología (Espanya)
Autor: Suñol Martínez, Joan Josep
González Gasch, Àlex
Escoda i Acero, Ma. Lluïsa
Vilaró, A.
Resum: A conventional thermogravimeter has been adapted with a small magnet to detect the Curie temperature, T C. The measurements were performed in several Fe(Ni)NbB alloys developed in a nanocrystalline form by mechanical alloying. The B addition favors a slight diminution (10-20°C), and the Ni addition the existence of three transitions related with bccFe, fcc(Fe-Ni) abd fccNi-rich environments. Furthermore, complementary analysis were performed by means of differential thermal analysis, scanning electron microscopy with energy dispersive X-ray microanalysis and by induced coupled plasma. Small contamination was found. A mass increase (about 1 mass%) was detected by thermogravimetry related to oxidation. Analysis allows us to state the inhomogeneity of the alloys obtained after 80 h of milling
Financial support from MICYT (project No. MAT2003-08271) and DURSI (project 2001SGR-00190) is acknowledged
Accés al document: http://hdl.handle.net/2072/298089
Llenguatge: eng
Editor: Springer Verlag
Drets: Tots els drets reservats
Matèria: Temperatura de Curie
Curie temperature
Aliatges
Alloys
Títol: Curie temperature in Fe(Ni)Nb based mechanically alloyed materials
Tipus: info:eu-repo/semantics/article
Repositori: Recercat

Matèries


Warning: error_log(/dades/dugi/log//dugi.log) [function.error-log]: failed to open stream: Read-only file system in /dades/dugi/lib/log/log.php on line 32

Autors


Warning: error_log(/dades/dugi/log//dugi.log) [function.error-log]: failed to open stream: Read-only file system in /dades/dugi/lib/log/log.php on line 32


Warning: fopen(/dades/dugi/cache/3dc50d1242d51373417e97d8b04225af_.html) [function.fopen]: failed to open stream: Read-only file system in /dades/dugi/end_cache.php on line 2