DUGi: Llistar Títols | dc.subject:"Materials compostos"

Llistar Títols

S'han trobat 300 ítems

Llistant ítems des de 150 a 175:

2 3 4 5 6 7 8 9 10 11 12

Format	Data	Títol	Autor
Format	Data	Títol	Autor
		Geometric model for 3D through-thickness orthogonal interlock composites	Isart Valle, Nativitat ; Mayugo Majó, Joan Andreu ; Blanco Villaverde, Norbert ; Ripoll Masferrer, Lluís ; Solà, A. ; Soler, M.
	gener 2015	Geometric model for 3D through-thickness orthogonal interlock composites	Isart Valle, Nativitat ; Mayugo Majó, Joan Andreu ; Blanco Villaverde, Norbert ; Ripoll Masferrer, Lluís ; Solà, A. ; Soler, Miquel
	31 maig 2023	Health monitoring of CFRP laminates under fatigue and fatigue after impact load via vibro-acoustic modulation measurements	Willmann, Erik
	2013	High-Performance-Tensile-Strength Alpha-Grass Reinforced Starch-Based Fully Biodegradable Composites	Gironès i Molera, Jordi ; Espinach Orús, Xavier ; Pellicer Johera, Neus ; Tresserras Picas, Josep ; Alcalà Vilavella, Manel ; Mutjé Pujol, Pere
		High-Performance-Tensile-Strength Alpha-Grass Reinforced Starch-Based Fully Biodegradable Composites	Gironès i Molera, Jordi ; Espinach Orús, Xavier ; Pellicer Johera, Neus ; Tresserras Picas, Josep ; Alcalà Vilavella, Manel ; Mutjé Pujol, Pere
		High-Performance-Tensile-Strength Alpha-Grass Reinforced Starch-Based Fully Biodegradable Composites	Gironès i Molera, Jordi ; Espinach Orús, Xavier ; Pellicer Johera, Neus ; Tresserras Picas, Josep ; Alcalà Vilavella, Manel ; Mutjé Pujol, Pere
	1 juny 2018	High-Performance-Tensile-Strength Alpha-Grass Reinforced Starch-Based Fully Biodegradable Composites
	5 juny 2018	High-Performance-Tensile-Strength Alpha-Grass Reinforced Starch-Based Fully Biodegradable Composites	Gironès i Molera, Jordi ; Espinach Orús, Xavier ; Pellicer Johera, Neus ; Tresserras Picas, Josep ; Alcalà Vilavella, Manel ; Mutjé Pujol, Pere
	2014	High stiffness performance alpha-grass pulp fiber reinforced thermoplastic starch-based fully biodegradable composites	Espinach Orús, Xavier ; Julián Pérez, Fernando ; Alcalà Vilavella, Manel ; Tresserras Picas, Josep ; Mutjé Pujol, Pere
		High stiffness performance alpha-grass pulp fiber reinforced thermoplastic starch-based fully biodegradable composites	Espinach Orús, Xavier ; Julián Pérez, Fernando ; Alcalà Vilavella, Manel ; Tresserras Picas, Josep ; Mutjé Pujol, Pere
	31 maig 2023	Hybridisation of carbon and natural fibers for sustainable composites in automotive applications	Corvo Alguacil, Marina
	13 novembre 2015	Hygrothermal effects on CFRP: testing, analysis and structural optimization	Marín Hernández, Lorena
		Hygrothermal effects on CFRP: testing, analysis and structural optimization	Marín Hernández, Lorena
	31 maig 2023	Identification of damage initiation and progression in open hole composites using acoustic emission and digital image correlation	Chandarana, Neha
	31 maig 2023	Implementation of 3d nonlinear material model in finite element code	Pupure, Liva
	18 juliol 2019	Improving compression after impact response of composite laminates through ply level hybridization with thin plies and unsymmetrical designs	Sasikumar, Aravind
	31 maig 2023	Incidence of the mechanisms of damage in the scale effect of composites involving Ultra Thin Plies	París Carballo, Federico
	31 maig 2023	Independent mesh method and RX-FEM modeling of 3d interlock woven composites with open hole	Mollenhauer, David
	31 maig 2023	Independent mesh method and RX-FEM modeling of 3d interlock woven composites with open hole	Hoos, Kevin H. ; Zhou, Eric ; Iarve, Endel V. ; Popelar, Carl ; Riha, David ; Mollenhauer, David H.
	31 maig 2023	Influence of voids on thick DCB joint behavior	Fan, Jialiang
		An Interface Damage Model for the Simulation of Delamination Under Variable-Mode Ratio in Composite Materials	Turon Travesa, Albert ; Camanho, Pedro Manuel Ponces Rodrigues de Castro ; Costa i Balanzat, Josep ; Dávila, Carlos G.
	octubre 2004	An Interface Damage Model for the Simulation of Delamination Under Variable-Mode Ratio in Composite Materials	Turon Travesa, Albert ; Camanho, Pedro Manuel Ponces Rodrigues de Castro ; Costa i Balanzat, Josep ; Dávila, Carlos G.
	1 juny 2018	An Interface Damage Model for the Simulation of Delamination Under Variable-Mode Ratio in Composite Materials
	5 juny 2018	An Interface Damage Model for the Simulation of Delamination Under Variable-Mode Ratio in Composite Materials	Turon Travesa, Albert ; Camanho, Pedro Manuel Ponces Rodrigues de Castro ; Costa i Balanzat, Josep ; Dávila, Carlos G.
	juliol 2024	Interlaminar fracture testing of multidirectional laminates: on finitewidth effect and residual stresses	Garulli, Torquato ; Arteiro, Albertino ; Blanco Villaverde, Norbert ; Renart Canalias, Jordi

2 3 4 5 6 7 8 9 10 11 12

DUGi

Portal de cerca conjunta als documents digitals de la UdG

Llistar Títols

Matèries

Autors