DUGi: Llistar Títols | dc.subject:"Mecànica"

Llistar Títols

S'han trobat 343 ítems

Llistant ítems des de 200 a 225:

4 5 6 7 8 9 10 11 12 13 14

Format	Data	Títol	Autor
Format	Data	Títol	Autor
	11 juliol 2016	Improved delamination resistance of thin-ply based laminates: an experimental and numerical study	Guillamet Busquets, Gerard
		Improved delamination resistance of thin-ply based laminates: an experimental and numerical study	Guillamet Busquets, Gerard
	31 maig 2023	Incidence of the mechanisms of damage in the scale effect of composites involving Ultra Thin Plies	París Carballo, Federico
	31 maig 2023	Incidence of the mechanisms of damage in the scale effect of composites involving Ultra Thin Plies	París, Federico
	16 novembre 2017	Incremental sheet forming applied to the manufacturing of biocompatible polymer prostheses	Bagudanch Frigolé, Isabel
	31 maig 2023	Independent mesh method and RX-FEM modeling of 3d interlock woven composites with open hole	Mollenhauer, David
	31 maig 2023	Independent mesh method and RX-FEM modeling of 3d interlock woven composites with open hole	Hoos, Kevin H. ; Zhou, Eric ; Iarve, Endel V. ; Popelar, Carl ; Riha, David ; Mollenhauer, David H.
		Influence of pre-bond moisture in the adherents on the fracture toughness of bonded joints for composite repairs	Budhe, Sandip Rudha ; Rodríguez Bellido, Ana Teresa ; Renart Canalias, Jordi ; Mayugo Majó, Joan Andreu ; Costa i Balanzat, Josep
	març 2014	Influence of pre-bond moisture in the adherents on the fracture toughness of bonded joints for composite repairs	Budhe, Sandip Rudha ; Rodríguez Bellido, Ana Teresa ; Renart Canalias, Jordi ; Mayugo Majó, Joan Andreu ; Costa i Balanzat, Josep
	31 maig 2023	Influence of voids on thick DCB joint behavior	Fan, Jialiang
	27 juliol 2004	Influencia del proceso de reciclado sobre las propiedades de los materiales compuestos obtenidos por inyección de poliestireno reforzado con fibras lignocelulósicas	López Sánchez, Ángel
	27 juliol 2004	Influencia del proceso de reciclado sobre las propiedades de los materiales compuestos obtenidos por inyección de poliestireno reforzado con fibras lignocelulósicas	López Sánchez, Ángel
		Influencia del proceso de reciclado sobre las propiedades de los materiales compuestos obtenidos por inyección de poliestireno reforzado con fibras lignocelulósicas	López Sánchez, Ángel
	juliol 2024	Interlaminar fracture testing of multidirectional laminates: on finitewidth effect and residual stresses	Garulli, Torquato ; Arteiro, Albertino ; Blanco Villaverde, Norbert ; Renart Canalias, Jordi
	15 juliol 2015	Intermittency of turbulence in natural waters: patchiness in the thermocline of a lake under low winds and small-scale intermittency in the bottom boundary layer of a tidal flow	Planella Morató, Jesús
		Intermittency of turbulence in natural waters: patchiness in the thermocline of a lake under low winds and small-scale intermittency in the bottom boundary layer of a tidal flow	Planella Morató, Jesús
	15 juliol 2015	Intermittency of turbulence in natural waters: patchiness in the thermocline of a lake under low winds and small-scale intermittency in the bottom boundary layer of a tidal flow	Planella Morató, Jesús
	31 maig 2023	Investigating shear performance of PMCS	Flores, Mark
	31 maig 2023	Investigation of failure mechanisms in L-angle composite laminates	Bushpalli, Sindhu
	31 maig 2023	Investigation of thickness effects in bi-axially braided glass fibre laminates using a parametrised RVE model	Luplow, Tim
	31 maig 2023	Investigation of transverse matrix cracking in fatigue for laminated composites	Patti, Stacy
	19 desembre 2008	Large-Scale Surface registration	Batlle Subirós, Elisabet
	19 desembre 2008	Large-Scale Surface registration	Batlle Subirós, Elisabet
		Large-Scale Surface registration	Batlle Subirós, Elisabet
	31 maig 2023	Longitudinal tensile failure models: experimental validation, benchmarking and future directions	Swolfs, Yentl

4 5 6 7 8 9 10 11 12 13 14

DUGi

Portal de cerca conjunta als documents digitals de la UdG

Llistar Títols

Matèries

Autors