DUGi: Llistar Títols | dc.subject:"Plàstics reforçats amb fibra de carboni -- Congressos"

Llistar Títols

S'han trobat 86 ítems

Llistant ítems des de 0 a 25:

1 2 3 4

Format	Data	Títol	Autor
Format	Data	Títol	Autor
	31 maig 2023	Accurate characterisation and modelling of the nonlinear bending behaviour of non-crimp fabrics for composite process simulations	Broberg, Peter Hede
	31 maig 2023	Adapted buckling support to investigate the compressive properties of long and thin specimen	Fiedler, Bodo
	31 maig 2023	Adhesively bonded joint shear test characterization using a modified arcan fixture	Brearley, David
	31 maig 2023	Arresting propagating kinkbands: failure mechanisms under longitudinal compression of carbon-boron fibre hybrids	Garulli, Torquato
	31 maig 2023	Arresting propagating kinkbands: failure mechanisms under longitudinal compression of carbon-boron fibre hybrids	Garulli, Torquato ; Katafiasz, Tomas ; Greenhalgh, Emile S. ; Pinho, Silvestre T.
	31 maig 2023	Assessment of cohesive law extrapolation procedure of adhesively bonded joints under different environmental conditions	Arrese Arratibel, Ainhoa
	31 maig 2023	Assessment of mode I fatigue delamination of composites through a rapid testing method	Parareda Oriol, Sergi
	31 maig 2023	Assessment of the qualities of carbon nanotube sensors for structural health monitoring of composites	Zarzoso Bueno, Moisés
	31 maig 2023	Bayesian prediction of the load response of composite structures to streamline certification approaches	Laux, Tobias
	31 maig 2023	A bio-inspired embedded composite stiffener for improved damage tolerance	Whitehouse, Adam
	31 maig 2023	A bio-inspired embedded composite stiffener for improved damage tolerance	Whitehouse, Adam D. ; Yang, Yifei ; Médeau, Victor ; Mencattelli, Lorenzo ; Greenhalgh, Emile S. ; Pinho, Silvestre T.
	31 maig 2023	CAI fatigue testing in CFRP: is the test representing what happens in real structures?	Biagini, Davide
	31 maig 2023	CAI fatigue testing in CFRP: is the test representing what happens in real structures?	Biagini, Davide ; Pascoe, John-Alan ; Alderliesten, René C.
	31 maig 2023	Calibration of a digital twin for structural testing	Bogenfeld, Raffael
	31 maig 2023	Challenges in determination of cohesive laws from r-curves of unidirectional composites experiencing delamination damage	Bangaru, Ashish Kumar
	31 maig 2023	Characterization of a filament wound thin-ply composite for a cryogenic tank for liquid hydrogen	Olsson, Robin
	31 maig 2023	Comparison between the inter- and intra-laminar fatigue crack propagation as obtained from DCB and cross-ply specimens	Carraro, Paolo Andrea
	31 maig 2023	Compressive crack resistance analysis of unidirectional thermoplastic composites	Danzi, Federico
	31 maig 2023	Crack density growth of high temperature cross-ply laminates subjected to elevated temperatures	Pakkam Gabriel, Vivek Richards
	31 maig 2023	Damage inception of composite under dynamic loadings	Pernas-Sánchez, Jesús
	31 maig 2023	Damage sequence of impact events on 3d-printed composite laminates with quasi-static indentation test	Fernández Chamorro, Alex
	31 maig 2023	Detecting and characterising interfacial fracture through the face sheets of sandwich structures using mirror-assisted imaging techniques	Leung, Hiu Ling
	31 maig 2023	Determination and modelization of mode I interlaminar fracture thoughness on 2D woven oxide/oxide composite using double cantilever beam test	Drouin, Thomas
	31 maig 2023	Determining fracture properties for predicting damage propagation from notches in composite structures	Wisnom, Michael
	31 maig 2023	Development of tensile specimens with bonded continuous protective layers for the accurate tensile failure strain determination of unidirectional carbon/epoxy composites	Czél, Gergely

1 2 3 4

DUGi

Portal de cerca conjunta als documents digitals de la UdG

Llistar Títols

Matèries

Autors