Composite materials -- Fracture -- Congresses
Llistar TÃtols per Matèria "Composite materials -- Fracture -- Congresses"
S'han trobat 81 Ãtems
Llistant Ãtems des de 0 a 25:
| Format | Data | TÃtol | Autor |
|---|
| Format | Data | TÃtol | Autor |
|---|
|
31 maig 2023 |
Accurate characterisation and modelling of the nonlinear bending behaviour of non-crimp fabrics for composite process simulations |
Broberg, Peter Hede
|
|
|
31 maig 2023 |
Adapted buckling support to investigate the compressive properties of long and thin specimen |
Fiedler, Bodo
|
|
|
31 maig 2023 |
Adhesively bonded joint shear test characterization using a modified arcan fixture |
Brearley, David
|
|
|
31 maig 2023 |
Arresting propagating kinkbands: failure mechanisms under longitudinal compression of carbon-boron fibre hybrids |
Garulli, Torquato
|
|
|
31 maig 2023 |
Assessment of cohesive law extrapolation procedure of adhesively bonded joints under different environmental conditions |
Arrese Arratibel, Ainhoa
|
|
|
31 maig 2023 |
Assessment of mode I fatigue delamination of composites through a rapid testing method |
Parareda Oriol, Sergi
|
|
|
31 maig 2023 |
Assessment of the qualities of carbon nanotube sensors for structural health monitoring of composites |
Zarzoso Bueno, Moisés
|
|
|
31 maig 2023 |
Bayesian prediction of the load response of composite structures to streamline certification approaches |
Laux, Tobias
|
|
|
31 maig 2023 |
A bio-inspired embedded composite stiffener for improved damage tolerance |
Whitehouse, Adam
|
|
|
31 maig 2023 |
CAI fatigue testing in CFRP: is the test representing what happens in real structures? |
Biagini, Davide
|
|
|
31 maig 2023 |
Calibration of a digital twin for structural testing |
Bogenfeld, Raffael
|
|
|
31 maig 2023 |
Challenges in determination of cohesive laws from r-curves of unidirectional composites experiencing delamination damage |
Bangaru, Ashish Kumar
|
|
|
31 maig 2023 |
Characterization of a filament wound thin-ply composite for a cryogenic tank for liquid hydrogen |
Olsson, Robin
|
|
|
31 maig 2023 |
Comparison between the inter- and intra-laminar fatigue crack propagation as obtained from DCB and cross-ply specimens |
Carraro, Paolo Andrea
|
|
|
31 maig 2023 |
Compressive crack resistance analysis of unidirectional thermoplastic composites |
Danzi, Federico
|
|
|
31 maig 2023 |
Crack density growth of high temperature cross-ply laminates subjected to elevated temperatures |
Pakkam Gabriel, Vivek Richards
|
|
|
31 maig 2023 |
Damage inception of composite under dynamic loadings |
Pernas-Sánchez, Jesús
|
|
|
31 maig 2023 |
Damage sequence of impact events on 3d-printed composite laminates with quasi-static indentation test |
Fernández Chamorro, Alex
|
|
|
31 maig 2023 |
Detecting and characterising interfacial fracture through the face sheets of sandwich structures using mirror-assisted imaging techniques |
Leung, Hiu Ling
|
|
|
31 maig 2023 |
Determination and modelization of mode I interlaminar fracture thoughness on 2D woven oxide/oxide composite using double cantilever beam test |
Drouin, Thomas
|
|
|
31 maig 2023 |
Determining fracture properties for predicting damage propagation from notches in composite structures |
Wisnom, Michael
|
|
|
31 maig 2023 |
Development of tensile specimens with bonded continuous protective layers for the accurate tensile failure strain determination of unidirectional carbon/epoxy composites |
Czél, Gergely
|
|
|
31 maig 2023 |
Dual-scale model for delamination of composites with different fiber orientations at interface |
Mehdikhani, Mahoor
|
|
|
31 maig 2023 |
Effects of variable amplitude fatigue on delamination and crack growth rate models |
Mosbjerg Jensen, Simon
|
|
|
31 maig 2023 |
Evaluating the intralaminar tensile fracture behavior of composite materials under high rate loading through a combined experimental and numerical methodology |
Artero Guerrero, José Alfonso
|
