Browse by Title
84 items found
Showing titles from 0 to 25:
| Format | Date | Title | Author |
|---|
| Format | Date | Title | Author |
|---|
|
2023 May 31 |
Accurate characterisation and modelling of the nonlinear bending behaviour of non-crimp fabrics for composite process simulations |
Broberg, Peter Hede
|
|
|
2023 May 31 |
Adapted buckling support to investigate the compressive properties of long and thin specimen |
Fiedler, Bodo
|
|
|
2023 May 31 |
Adhesively bonded joint shear test characterization using a modified arcan fixture |
Brearley, David
|
|
|
2023 May 31 |
Arresting propagating kinkbands: failure mechanisms under longitudinal compression of carbon-boron fibre hybrids |
Garulli, Torquato
|
|
|
2023 May 31 |
Assessment of cohesive law extrapolation procedure of adhesively bonded joints under different environmental conditions |
Arrese Arratibel, Ainhoa
|
|
|
2023 May 31 |
Assessment of mode I fatigue delamination of composites through a rapid testing method |
Parareda Oriol, Sergi
|
|
|
2023 May 31 |
Assessment of the qualities of carbon nanotube sensors for structural health monitoring of composites |
Zarzoso Bueno, Moisés
|
|
|
2023 May 31 |
Bayesian prediction of the load response of composite structures to streamline certification approaches |
Laux, Tobias
|
|
|
2023 May 31 |
A bio-inspired embedded composite stiffener for improved damage tolerance |
Whitehouse, Adam
|
|
|
2023 May 31 |
CAI fatigue testing in CFRP: is the test representing what happens in real structures? |
Biagini, Davide
|
|
|
2023 May 31 |
Calibration of a digital twin for structural testing |
Bogenfeld, Raffael
|
|
|
2023 May 31 |
Challenges in determination of cohesive laws from r-curves of unidirectional composites experiencing delamination damage |
Bangaru, Ashish Kumar
|
|
|
2023 May 31 |
Characterization of a filament wound thin-ply composite for a cryogenic tank for liquid hydrogen |
Olsson, Robin
|
|
|
2023 May 31 |
Comparison between the inter- and intra-laminar fatigue crack propagation as obtained from DCB and cross-ply specimens |
Carraro, Paolo Andrea
|
|
|
2023 May 31 |
Compressive crack resistance analysis of unidirectional thermoplastic composites |
Danzi, Federico
|
|
|
2023 May 31 |
Crack density growth of high temperature cross-ply laminates subjected to elevated temperatures |
Pakkam Gabriel, Vivek Richards
|
|
|
2023 May 31 |
Damage inception of composite under dynamic loadings |
Pernas-Sánchez, Jesús
|
|
|
2023 May 31 |
Damage sequence of impact events on 3d-printed composite laminates with quasi-static indentation test |
Fernández Chamorro, Alex
|
|
|
2023 May 31 |
Detecting and characterising interfacial fracture through the face sheets of sandwich structures using mirror-assisted imaging techniques |
Leung, Hiu Ling
|
|
2022 September |
Determinació de la resistència a fractura pel mode II per materials reforçats unidirecionament utilitzant una prova de cà rrega final calibrada (C-ELS) i una longitud efectiva de fissura aproximada |
Yáñez Alabart, DarÃo
|
|
|
2023 May 31 |
Determination and modelization of mode I interlaminar fracture thoughness on 2D woven oxide/oxide composite using double cantilever beam test |
Drouin, Thomas
|
|
|
2023 May 31 |
Determining fracture properties for predicting damage propagation from notches in composite structures |
Wisnom, Michael
|
|
|
2023 May 31 |
Development of tensile specimens with bonded continuous protective layers for the accurate tensile failure strain determination of unidirectional carbon/epoxy composites |
Czél, Gergely
|
|
|
2017 February |
Disseny d’un utillatge per a l’assaig en paral·lel de la tenacitat a la fractura en mode II |
Jiang, Rui
|
|
|
Disseny d’un utillatge per a l’assaig en paral·lel de la tenacitat a la fractura en mode II |
Jiang, Rui
|
