Llistar TÃtols
S'han trobat 107 Ãtems
Llistant Ãtems des de 50 a 75:
| Format | Data | TÃtol | Autor |
|---|
| Format | Data | TÃtol | Autor |
|---|
|
31 maig 2023 |
Health monitoring of CFRP laminates under fatigue and fatigue after impact load via vibro-acoustic modulation measurements |
Willmann, Erik
|
|
31 maig 2023 |
Health monitoring of CFRP laminates under fatigue and fatigue after impact load via vibro-acoustic modulation measurements |
Willmann, Erik
; Fiedler, Bodo
|
|
|
31 maig 2023 |
Hybridisation of carbon and natural fibers for sustainable composites in automotive applications |
Corvo Alguacil, Marina
|
|
|
31 maig 2023 |
Identification of damage initiation and progression in open hole composites using acoustic emission and digital image correlation |
Chandarana, Neha
|
|
|
31 maig 2023 |
Implementation of 3d nonlinear material model in finite element code |
Pupure, Liva
|
|
|
31 maig 2023 |
Incidence of the mechanisms of damage in the scale effect of composites involving Ultra Thin Plies |
ParÃs Carballo, Federico
|
|
|
31 maig 2023 |
Independent mesh method and RX-FEM modeling of 3d interlock woven composites with open hole |
Mollenhauer, David
|
|
|
31 maig 2023 |
Influence of voids on thick DCB joint behavior |
Fan, Jialiang
|
|
|
juliol 2024 |
Interlaminar fracture testing of multidirectional laminates: on finitewidth effect and residual stresses |
Garulli, Torquato
; Arteiro, Albertino
; Blanco Villaverde, Norbert
; Renart Canalias, Jordi
|
|
|
31 maig 2023 |
Investigating shear performance of PMCS |
Flores, Mark
|
|
|
31 maig 2023 |
Investigation of failure mechanisms in L-angle composite laminates |
Bushpalli, Sindhu
|
|
|
gener 2016 |
Investigation and optimization of 3D printers setting and surface treatment |
Gávay Pál, Bence
|
|
|
Investigation and optimization of 3D printers setting and surface treatment |
Gávay Pál, Bence
|
|
|
|
Investigation and optimization of 3D printers setting and surface treatment |
Gávay Pál, Bence
|
|
|
1 juny 2018 |
Investigation and optimization of 3D printers setting and surface treatment |
|
|
|
5 juny 2018 |
Investigation and optimization of 3D printers setting and surface treatment |
Gávay Pál, Bence
|
|
|
31 maig 2023 |
Investigation of thickness effects in bi-axially braided glass fibre laminates using a parametrised RVE model |
Luplow, Tim
|
|
|
31 maig 2023 |
Investigation of transverse matrix cracking in fatigue for laminated composites |
Patti, Stacy
|
|
|
31 maig 2023 |
Longitudinal tensile failure models: experimental validation, benchmarking and future directions |
Swolfs, Yentl
|
|
|
31 maig 2023 |
Material testing 2.0 for composites |
Pierron, Fabrice
|
|
|
31 maig 2023 |
Measurement of mixed-mode cohesive laws of a UD composite undergoing delamination with large-scale bridging |
Erives, Ruben
|
|
|
31 maig 2023 |
Measuring the compressive behaviour of glass/carbon fibre hybrid composite with a 4-point flexural test |
Tongloet, Aree
|
|
|
19 juny 2023 |
A mechanical interlocking joint between sheet metal and carbon fibre reinforced polymers through punching |
Latorre Lázaro, Núria
; Casellas, Daniel
; Costa i Balanzat, Josep
|
|
|
31 maig 2023 |
Mechanical joining technology between metal and carbon fiber reinforced polymers through punching |
Latorre Lázaro, Núria
|
|
|
31 maig 2023 |
Microcracking of CFRP composites during cryogenic thermal cycling |
Edwards, Huw
|
