Browse by Title
134 items found
Showing titles from 75 to 100:
Format | Date | Title | Author |
---|
Format | Date | Title | Author |
|
2023 May 31 |
Incidence of the mechanisms of damage in the scale effect of composites involving Ultra Thin Plies |
ParÃs, Federico
|
|
2023 May 31 |
Independent mesh method and RX-FEM modeling of 3d interlock woven composites with open hole |
Mollenhauer, David
|
|
2023 May 31 |
Independent mesh method and RX-FEM modeling of 3d interlock woven composites with open hole |
Hoos, Kevin H.
; Zhou, Eric
; Iarve, Endel V.
; Popelar, Carl
; Riha, David
; Mollenhauer, David H.
|
|
|
Influence of pre-bond moisture in the adherents on the fracture toughness of bonded joints for composite repairs |
Budhe, Sandip Rudha
; RodrÃguez Bellido, Ana Teresa
; Renart Canalias, Jordi
; Mayugo Majó, Joan Andreu
; Costa i Balanzat, Josep
|
|
2014 March |
Influence of pre-bond moisture in the adherents on the fracture toughness of bonded joints for composite repairs |
Budhe, Sandip Rudha
; RodrÃguez Bellido, Ana Teresa
; Renart Canalias, Jordi
; Mayugo Majó, Joan Andreu
; Costa i Balanzat, Josep
|
|
2023 May 31 |
Influence of voids on thick DCB joint behavior |
Fan, Jialiang
|
|
2023 May 31 |
Investigating shear performance of PMCS |
Flores, Mark
|
|
2023 May 31 |
Investigation of failure mechanisms in L-angle composite laminates |
Bushpalli, Sindhu
|
|
2023 May 31 |
Investigation of thickness effects in bi-axially braided glass fibre laminates using a parametrised RVE model |
Luplow, Tim
|
|
2023 May 31 |
Investigation of transverse matrix cracking in fatigue for laminated composites |
Patti, Stacy
|
|
2023 May 31 |
Longitudinal tensile failure models: experimental validation, benchmarking and future directions |
Swolfs, Yentl
|
|
2023 May 31 |
Material testing 2.0 for composites |
Pierron, Fabrice
|
|
2023 May 31 |
Measurement of mixed-mode cohesive laws of a UD composite undergoing delamination with large-scale bridging |
Erives, Ruben
|
|
2023 May 31 |
Measuring the compressive behaviour of glass/carbon fibre hybrid composite with a 4-point flexural test |
Tongloet, Aree
|
|
2023 May 31 |
Mechanical joining technology between metal and carbon fiber reinforced polymers through punching |
Latorre Lázaro, Núria
|
|
2023 May 31 |
Microcracking of CFRP composites during cryogenic thermal cycling |
Edwards, Huw
|
|
2023 May 31 |
Mode decoupling in interlaminar fracture toughness tests on bimaterial specimens |
Mujika, Faustino
|
|
2023 May 31 |
Mode decoupling in interlaminar fracture toughness tests on bimaterial specimens |
Mujika, Faustino
; Tsokanas, Panayiotis
; Arrese Arratibel, Ainhoa
; Silva, Lucas Filipe Martins da
|
|
2023 May 31 |
Mode-I fracture toughness of thin CF/PA6 UD composites identified in a DCB test with stiffening al beams in the presence of debonding |
Simaafrookhteh, Sepehr
|
|
2007 April 27 |
Modelización constitutiva y computacional del daño y la fractura de materiales compuestos |
Maimà Vert, Pere
|
|
|
Modelización constitutiva y computacional del daño y la fractura de materiales compuestos |
Maimà Vert, Pere
|
|
2023 May 31 |
Monitoring of water absorption and its effects on mechanical performance of thick GFRP structures by integrated smart sensors |
Gibhardt, Dennis
|
|
2023 May 31 |
Multiple amplitude testing method for detection of local damage evolution in bast fiber-reinforced polymers |
Helwing, Ramon
|
|
|
Nominal strength of quasi-brittle open hole specimens under biaxial loading conditions |
Kabeel, Abdallah Mahmoud Bayoumi
; Maimà Vert, Pere
; Gascons i Clarió, NarcÃs
; González Juan, Emilio Vicente
|
|
2013 October 18 |
Nominal strength of quasi-brittle open hole specimens under biaxial loading conditions |
Kabeel, Abdallah Mahmoud Bayoumi
; Maimà Vert, Pere
; Gascons i Clarió, NarcÃs
; González Juan, Emilio Vicente
|