DUGi: Llistar Títols | dc.subject:"Materials laminats"

Llistar Títols

S'han trobat 130 ítems

Llistant ítems des de 50 a 75:

1 2 3 4 5 6

Format	Data	Títol	Autor
Format	Data	Títol	Autor
	31 maig 2023	Experimental testing and numerical simulation of bearing and filled hole tension carbon specimens under dynamic loading	Guerrero García, José Manuel
	31 maig 2023	Failure analysis of hybrid glass/carbon thin ply laminates subjected to tensile loading	Snepsts, Alens
	abril 2007	Failure mechanism under tensile loads in CFRP 0-90º cross-ply laminates containing voids	Lozano Pedrero, Carles
		Failure mechanism under tensile loads in CFRP 0-90º cross-ply laminates containing voids	Lozano Pedrero, Carles
	31 maig 2023	Fatigue cohesive zone modelling of a benchmark test for composites under complex loading sequences resulting in non-self-similar damage evolution	Leciñana Arregui, Iñaki
	31 maig 2023	Fatigue failure prediction in GFRP composite laminates: comprehensive fatigue damage model, software implementation in SAMCEF and benchmark tests	Carreras, Laura
	31 maig 2023	Full Field Data Fusion (FFDF) to characterise subsurface defects in composite structures	Dulieu-Barton, Janice M.
	31 maig 2023	Full Field Data Fusion (FFDF) to characterise subsurface defects in composite structures	Dulieu-Barton, Janice M. ; Jiménez Fortunato, Irene ; Ruiz Iglesias, Rafael ; Leung, Emily ; Olafsson, Geir ; Thomsen, Ole Thybo
	31 maig 2023	Health monitoring of CFRP laminates under fatigue and fatigue after impact load via vibro-acoustic modulation measurements	Willmann, Erik
	31 maig 2023	Hybridisation of carbon and natural fibers for sustainable composites in automotive applications	Corvo Alguacil, Marina
		Hygrothermal effects on the translaminar fracture toughness of cross-ply carbon/epoxy laminates: Failure mechanisms	Marín Hernández, Lorena ; González Juan, Emilio Vicente ; Maimí Vert, Pere ; Trias Mansilla, Daniel ; Camanho, Pedro Manuel Ponces Rodrigues de Castro
	18 gener 2016	Hygrothermal effects on the translaminar fracture toughness of cross-ply carbon/epoxy laminates: Failure mechanisms	Marín Hernández, Lorena ; González Juan, Emilio Vicente ; Maimí Vert, Pere ; Trias Mansilla, Daniel ; Camanho, Pedro Manuel Ponces Rodrigues de Castro
	31 maig 2023	Identification of damage initiation and progression in open hole composites using acoustic emission and digital image correlation	Chandarana, Neha
	31 maig 2023	Implementation of 3d nonlinear material model in finite element code	Pupure, Liva
	juny 2015	Improvement of the carbon composite skin of the fuselage of an aircraft by means of optimization algorithms to define laminate stacking sequences	García García, Axel
		Improvement of the carbon composite skin of the fuselage of an aircraft by means of optimization algorithms to define laminate stacking sequences	García García, Axel
	31 maig 2023	Incidence of the mechanisms of damage in the scale effect of composites involving Ultra Thin Plies	París Carballo, Federico
	31 maig 2023	Incidence of the mechanisms of damage in the scale effect of composites involving Ultra Thin Plies	París, Federico
	31 maig 2023	Independent mesh method and RX-FEM modeling of 3d interlock woven composites with open hole	Mollenhauer, David
	31 maig 2023	Influence of voids on thick DCB joint behavior	Fan, Jialiang
		An Interface Damage Model for the Simulation of Delamination Under Variable-Mode Ratio in Composite Materials	Turon Travesa, Albert ; Camanho, Pedro Manuel Ponces Rodrigues de Castro ; Costa i Balanzat, Josep ; Dávila, Carlos G.
	octubre 2004	An Interface Damage Model for the Simulation of Delamination Under Variable-Mode Ratio in Composite Materials	Turon Travesa, Albert ; Camanho, Pedro Manuel Ponces Rodrigues de Castro ; Costa i Balanzat, Josep ; Dávila, Carlos G.
	1 juny 2018	An Interface Damage Model for the Simulation of Delamination Under Variable-Mode Ratio in Composite Materials
	5 juny 2018	An Interface Damage Model for the Simulation of Delamination Under Variable-Mode Ratio in Composite Materials	Turon Travesa, Albert ; Camanho, Pedro Manuel Ponces Rodrigues de Castro ; Costa i Balanzat, Josep ; Dávila, Carlos G.
	juliol 2024	Interlaminar fracture testing of multidirectional laminates: on finitewidth effect and residual stresses	Garulli, Torquato ; Arteiro, Albertino ; Blanco Villaverde, Norbert ; Renart Canalias, Jordi

1 2 3 4 5 6

DUGi

Portal de cerca conjunta als documents digitals de la UdG

Llistar Títols

Matèries

Autors